BMW E36 M52 STANDALONE ECU | RM PRIMIS PLUG AND PLAY ECU FOR M52 BMW

$967.49$1,102.91

BMW E36 M52 Standalone ECU | RM Primis Plug and Play ECU for M52 & S52

For Bmw E36, E39, E38 with M52 single vanos or S52 engines

BMW M52 PLUG AND PLAY STANDALONE ECU 320I, 520I, 323I, 523I, Z3, 328I, 528I, 728I

United States dollar ($) - USD
  • United States dollar ($) - USD
  • Euro (€) - EUR
  • Pound sterling (£) - GBP

Description

BMW E36 M52 Standalone ECU | RM Primis Plug and Play ECU for M52 & S52

For Bmw E36, E39, E38 with M52 single vanos or S52 engines

BMW M52 PLUG AND PLAY STANDALONE ECU 320I, 520I, 323I, 523I, Z3, 328I, 528I, 728I

 

Product Description:

Enhance your BMW E36 with our state-of-the-art RM Primis Standalone ECU, designed for vehicles with Siemens MS41.0 ECUs. Engineered for seamless integration, this ECU provides advanced performance features and fail-safe protections, ensuring optimal control over your vehicle’s engine management.

Key Features:

  • Plug and Play Installation: Includes RM Primis, harness adaptor, ECU-adaptor cable, USB cable, and additional accessories for easy setup.
  • Full CAN Bus Control: Manages all vehicle modules and supports ZF 5HP automatic transmission with GS20 TCU compatibility.
  • Comprehensive Engine Management: Controls Vanos, and every other actuator on the engine
  • Advanced Tuning/Datalogging: Uses proprietary RM-Tuner software for detailed tuning and real-time data logging.

Performance Enhancements:

  • Internal 400kpa MAP Sensor: Provides precise monitoring and control for boosted applications.
  • Drive by Wire Control: Option to add electronic throttle for improved throttle response.
  • Wideband Sensor Compatibility: Supports LSU4.9 or LSU4.2 wideband sensors (NTK sensors being tested).
  • Boost Control: Features open/closed loop PID control with dual tables for precise boost management.
  • VVT Control: Open/closed loop control with 2 channels for variable valve timing.
  • Idle Control: Open/closed loop control with 1 or 3 wire valve and ignition control mode.
  • Antilag/Launch Control: Includes boost by gear for enhanced launch performance.
  • A/C: Offers control of the Air-conditioning

Technical Specifications:

  • IGN Channels: 6
  • INJ Channels: 6
  • GP Low Side Outputs: 6
  • GP High Side Outputs: 4
  • VR Sensor Inputs: 1 or 2
  • Digital Sensor Inputs: 3
  • Knock Sensors: 2
  • Electronic Throttle: 1
  • GP Analog Inputs: 8
  • Dedicated IAT/CLT/TPS: Yes
  • CAN Bus: Yes
  • Programmable Inputs/Outputs: Yes (several rules available)

Additional Features:

  • Sequential Fuel and Ignition: Supports full sequential fuel and ignition for up to 6 cylinders.
  • Customizable Settings: Easily adjust settings through the RM-Tuner software.
  • Comprehensive Support: Access detailed guides and support at our Primis Help Center.

Compatibility Note:

  • The Primis requires the original CAM sensor on this engines to be swapped with a M54/M52TU HALL Cam sensor, the original frequency type CAM sensor is not compatible with standalone ecu’s the CAM sensor can be supplied by us if you request.
  • The ECU can be used without CAM sensor but it will not run full sequential fuel/ignition, so this is not a mandatory change.

Why Choose Our Standalone ECU?

  • Enhanced Engine Management: Provides precise control over various engine parameters for improved performance.
  • User-Friendly Installation: Designed for a straightforward plug and play solution.
  • Comprehensive Support: Includes free tuning software and detailed installation instructions.
  • Versatile Compatibility: Suitable for BMW E36 models with Siemens MS41.0ECUs.

Additional information

Accessories

,

Set

,